Show big image Sent to a friend	Converter RS485 to ZigBee wireless, DIN rail, TIV49A_R3 w antenna., CONV-RS4852ZB   Code: CONV-RS4852ZB Price: Contact us for pricing

The Converter RS485 to ZigBee wireless, DIN rail, TIV49A_R3, with antenna is used for replacement of wire communication to a wireless radio communication. This converter acts as communication interface and converts RS485 communication into ZigBee wireless mesh network. On the other side this module converts wireless ZB radio signals back to wired signals. It can work as a master-coordinator on Sigma side, also as a slave-router, or endpoint on Nano / Quark / Micro / Pico side. The installation is easy, assembly and connection concept is not complicated.
Module is ideally suited to convert the wire communication into wireless in middle-sized and large on-grid solar power plants. It’s benefit is to use it due to lightning strikes, due to too high potential voltage differences between sectors of solar power plant and because of too long distances of cables. Consequently also because of the costs of laying the cables into the ground and cables itself.

Overview
Professional use
• Drive and positioning of Single or Dual Axis Solar Trackers
• Integration of Sat Control equipment into existing control-room technology
• Automatic update of firmware from Sigma via (OTA)

Flexible
• Data interface in accordance with the MODBUS communication standards in the field of automation technology
• Simple and fast installation, high reliability
• Possibility of replacing the LoRa and ZigBee interface without replacing the converter.

Reliable
• Direct communication with the Sigma Solar Server via RS485 Service Interface
• Meets the requirements of the EU Low-Voltage Directive for grid safety management
• ZigBee Wireless network, easy installation which means no communication cables for installation
on ground.
• Less chances of spreading damages due to lightning strike.

Operation
Operation Sigma side – master coordinator
Type Positioner side as slave – router or end point
Communication
Positioner communication Serial MODBUS Wireless mash network with ZigBee module
Wireless communication protocol IEEE® 802.15.4 OEM RF Modules by MaxStream
Interfaces 
Max. number of controlled devices up to 8 different positioners
Max. communication range
Wireless mash network 150 m on open field
Power supply
Power supply External SMPS type (not included)
Input voltage 24 VDC +5% / –15%
Power consumption in idle 1.5 W
Environmental conditions in operation
Ambient temperature –30°C ... +80°C
Relative air humidity 0% ... 85%, non-condensing
General data
Dimensions (L / W / H) in mm 92 / 45 / 25
Weight 55 g
Mounting location Indoor
Mounting options DIN rail mounting
Manual buttons 2 (Binding, Reference)
Upgrading In the field via Sigma through Wireless mash network with ZigBee module
Languages 
Language versions – manual English
Features 
Warranty 2 years*
Certificates and approvals www.solar-motors.com
Life Time Min.10 years; typical 20 years
* Optionally 5 or 10 years for additional payment.

DOCUMENTATION:
Technical datasheet ENG Medium resolution: konverter RS4852 ZigBee_MR.pdf
Technical datasheet ENG Low resolution: konverter RS4852 ZigBee_LR.pdf