| |
Home page
> SOLAR TRACKERS
> SINGLE AXIS SUN TRACKERS
> Solar Motor Sun Tracer SM12SLT 1-axis with backstructure for 12 panels (2,16 kWp) without ground screws.
| Number of votes: 8, Total vote: 3.3 |
|
|
| SunTracer Family Comparison (review between models) |
| Mechanical Capabilities |
| Number of turning axis |
Single-Axis |
| Hour Angle Limit |
100˚, software and hardware limit |
| Elevation angle |
15 - 90˚, adjustable start |
| Type of hour-angle motor |
Linear Motor SM4S900M3 with stroke of 900 mm |
| Type of elevation-angle motor |
/ |
| Hour-angle shaft diameter and length |
Square tube 120x120 mm, L=5000 mm (steel) |
| Turning speed of hour angle shaft |
2,33 mm/s |
| Turning speed of elevation shaft |
/ |
| Max. dynamic torque of the hour-angle shaft |
>4780 Nm, see graph |
| Max. dynamic torque of elevation shaft |
/ |
| Destructive torque of the hour-angle shaft |
>9000 Nm, see graph |
| Destructive torque of elevation shaft |
>1500 Nm, see graph |
| Backstructure size |
4 Arms lenght of 3280 (L) mm |
| Type of backstructure clamp |
Toothed scissors gripers - 48 pcs |
| Tube diameter for mounting |
/ |
| Max. dimensions of a solar panel |
12 pieces of 0,99 m x 1,68 m in total 20,00 m2 |
| Max. weight of a solar panel |
12 pcs per 25 kg |
| Estimated service life |
10.000 rotations of 200° (100°E + 100°W), or 20 years - (DC motor service in each 10 years or 5000 turns) |
| |
| Positioning System Data |
| Tracking accuracy |
<0.5˚ (optionally <0.1˚ - for additional payment) |
| Operating Protocol |
TdAPS (Time derived Astronomical Positioning System) |
| Type of Positioning System |
Servo driver positioner with TdAPS arc logic function calc. |
| Type of positioner |
Din Rail positioner MICRO and externor cables |
| Type of timer |
GMT clock with EOT and calendar |
| Type of application program for supervision and setting |
Solar tracking system monitor via web site |
| Setting and changing data via PC |
Yes, It can be setup up to 1000 parameters |
| Monitoring possibility via PC |
Yes, It can be monitored up to 1000 parameters |
| Turned on the position sent from PC |
Yes, it turn on position sent from PC, also all other setting can be commanded with string sent from PC |
| Turning time interval |
1 minute (0,25°) |
| |
| Communication Data |
| Type of communication interface |
USB interface |
| Networking solution for control from centre |
CAN BUS, RS485 |
| |
| Firmware - Software |
| Upgrading possibility via PC |
Yes, firmware via PC with help of web wizard |
| |
| Electrical Data |
| Motor Power Supply |
24 VDC ± 10% (5A current capacity) |
| Backup battery |
CR 2512 coin |
| Max. consumption during the operation of the hour-angle shaft |
4A @ 4780 Nm |
| Max. Current of elevation shaft |
/ |
| Standby consumption (when is not moving) |
60 mA @ 24 VDC |
| Power supply connection |
1 piece of 2 Wire Cable with an Internal Cu Conductor of 1,5 mm2 (not included with kit) |
| Box |
190 (L) x 140 (W) x 70 (H) mm with connection harness |
| |
| Environmental Data |
| Operating temperature |
-25°C to +85°C (optionally with artic grease for teperatures from -40°C up to +85°C) |
| Operation at humidity |
0% to 100%, relative humidity |
| Max. safe wind speed |
<180 km/h (tested up to 230 km/h) |
| |
| Corrosion, weather and chemical resistance |
| Neutral Salt Spray (3000 h, EN ISO 9227 NSS) |
/ |
| Hot-dip galvanizing (HDG, EN ISO 1461) |
75 - 100 μm (equivalent of 50 years) |
| |
| Packaging |
| Dimensions of a packed product |
1 box of 5 (L) x 0,5 (W) x 0,5 (H) m (Wooden Box is not icluded with kit) |
| Product weight |
350 kg |
| |
| Quality Certificates |
| International Protection Rating (IEC 60529) |
IP33 |
| Electromagnetic Compatibility (EMC Directive 89/336/EEC) |
Yes |
| Low Voltage Equipment Directive (EEC Council Directive 73/23/EEC) |
Yes |
| |
| Optional Properties |
| Anti-Shadowing Function |
Yes, included |
| Heliostat usage |
No |
|
1 axis or dual axis Solar
Tracker with accuracy better than 0,5 deg and backstructure for 12 pieces
of solar panels dimensions 0,82 m x 1,604 m and weight of 25 kg max
each. So together for 20m2 solar panel surface. A Suitable for PV panels,
concentrators - CPV, heliostats. Usage at homes: on-grid at roof on houses,
trafic signalisations, street light, cottages, small and large powerplants where
solar panels are connected in serial and output is connected directly to
inverter or an external charging device. Wind resistance is minimal
180km/h. Ground screws are not part of this solar
tracker package. You can buy it separatelly.
Solar tracker anti-shadowing software
function included.
Real energy measurement of two equal solar panels (fixed and
motorized)
- Three equal solar panels were exposed to the real
sun and conversed electrical power was measured.
- Test conditions:
- Solar panels (all):
2160W (producer spec. at AM 1.5)
- Date:
July 2009
- Time:
4:00 to 20:00 (sun time)
- Geo.
Latitude: 46°
N
- Weather conditions: sunny, but not totally
clear
- Results:
- Average energy of
fixed: 9028.8Wh
- Average energy of
motorized: 14623.2Wh
- Note: sum of motor energy consumption through all day
is 35.5Wh or 0.24% of all collected energy.
Efficiency of motorized panel:
161,6%
- Graphic chart of the motor dinamic and
static torque
|
Solar
Tracker 1-axis with backstr. for 12 panels / SM12SLT /
383106390114 |
|
|
Instructions for
installation and use in PDF format |
|
| -
English user manual in PDF format - the latest |
Download |
|
- English user manual in PDF format - previous |
Download |
|
- French user manual
in PDF format |
Download |
|
- German user manual in PDF
format |
Download |
|
- Italian user manual in PDF
format |
Download |
|
- Slovenian user manual in
PDF format - the latest!! |
Download |
|
- Spanish user manual in PDF
format |
Download |
|
Leaflets |
|
|
- English leaflet in PDF format
medium resolution |
Download |
|
- English leaflet in PDF format
low resolution |
Download |
|
The
latest firmware |
|
|
Please, browse on support
page |
|
|
|
|
|
Certificates |
|
|
- Declaration of Conformity in
PDF format |
Download |
 |
| |
| |
| |
| |
| |
|
Published 1/7/2011 - CLOSED FOR SUMMER HOLIDAYS
Dear Valued Customers
We inform all our valued customers that we will be closed for Summer holidays from 23th of July 2011 to 8th August 2011.
Thank you for understanding.
Yours Sincerely,
Bogdan Bolka, CEO
All news? > Read More
------------------------------------ |
|
|
