|
Home page
> SOLAR TRACKERS
> SINGLE AXIS SUN TRACKERS
> Solar Motor Sun Tracer ST12SLT 1-axis with backstructure for 12 panels without ground screws, 0114 / ST12SLT
Number of votes: 22, Total vote: 3 |
|
|
SunTracer Family Comparison (review between models) |
Mechanical Capabilities |
Number of turning axis |
Single-Axis |
Hour Angle Limit |
100˚, software and hardware limit |
Elevation angle |
15 - 90˚, adjustable start |
Type of hour-angle motor |
Linear Motor SM4S900M3 with stroke of 900 mm |
Type of elevation-angle motor |
/ |
Hour-angle shaft diameter and length |
Square tube 120x120 mm, L=5000 mm (steel) |
Turning speed of hour angle shaft |
2,33 mm/s |
Turning speed of elevation shaft |
/ |
Max. dynamic torque of the hour-angle shaft |
>4780 Nm, see graph |
Max. dynamic torque of elevation shaft |
/ |
Destructive torque of the hour-angle shaft |
>9000 Nm, see graph |
Destructive torque of elevation shaft |
>1500 Nm, see graph |
Backstructure size |
4 Arms lenght of 3280 (L) mm |
Type of backstructure clamp |
Toothed scissors gripers - 48 pcs |
Tube diameter for mounting |
/ |
Max. dimensions of a solar panel |
12 pieces of 0,99 m x 1,68 m in total 20,00 m2 |
Max. weight of a solar panel |
12 pcs per 25 kg |
Estimated service life |
10.000 rotations of 200° (100°E + 100°W), or 20 years - (DC motor service in each 10 years or 5000 turns) |
|
Positioning System Data |
Tracking accuracy |
<0.5˚ (optionally <0.1˚ - for additional payment) |
Operating Protocol |
TdAPS (Time derived Astronomical Positioning System) |
Type of Positioning System |
Servo driver positioner with TdAPS arc logic function calc. |
Type of positioner |
Din Rail positioner MICRO and externor cables |
Type of timer |
GMT clock with EOT and calendar |
Type of application program for supervision and setting |
Solar tracking system monitor via web site |
Setting and changing data via PC |
Yes, It can be setup up to 1000 parameters |
Monitoring possibility via PC |
Yes, It can be monitored up to 1000 parameters |
Turned on the position sent from PC |
Yes, it turn on position sent from PC, also all other setting can be commanded with string sent from PC |
Turning time interval |
1 minute (0,25°) |
|
Communication Data |
Type of communication interface |
USB interface |
Networking solution for control from centre |
CAN BUS, RS485 |
|
Firmware - Software |
Upgrading possibility via PC |
Yes, firmware via PC with help of web wizard |
|
Electrical Data |
Motor Power Supply |
24 VDC ± 10% (5A current capacity) |
Backup battery |
CR 2512 coin |
Max. consumption during the operation of the hour-angle shaft |
4A @ 4780 Nm |
Max. Current of elevation shaft |
/ |
Standby consumption (when is not moving) |
60 mA @ 24 VDC |
Power supply connection |
1 piece of 2 Wire Cable with an Internal Cu Conductor of 1,5 mm2 (not included with kit) |
Junction box |
190 (L) x 140 (W) x 70 (H) mm with connection harness |
|
Environmental Data |
Operating temperature |
-25°C to +85°C (optionally with artic grease for teperatures from -40°C up to +85°C) |
Operation at humidity |
0% to 100%, relative humidity |
Max. safe wind speed |
<72 km/h (average) (max. peak wind speed up to 140 km/h) |
|
Corrosion, weather and chemical resistance |
Neutral Salt Spray (3000 h, EN ISO 9227 NSS) |
/ |
Hot-dip galvanizing (HDG, EN ISO 1461) |
75 - 100 μm (equivalent of 50 years) |
|
Packaging |
Dimensions of a packed product |
1 box of 5 (L) x 0,5 (W) x 0,5 (H) m (Wooden Box is not icluded with kit) |
Product weight |
350 kg |
|
Quality Certificates |
International Protection Rating (IEC 60529) |
IP63 |
Electromagnetic Compatibility (EMC Directive 89/336/EEC) |
Yes |
Low Voltage Equipment Directive (EEC Council Directive 73/23/EEC) |
Yes |
|
Optional Properties |
Anti-Shadowing Function |
Yes, included |
Heliostat usage |
No |
|
1 axis or single axis Solar
Tracker with accuracy better than 0,5 deg and backstructure for 12 pieces
of solar panels dimensions 0,82 m x 1,604 m and weight of 25 kg max
each. So together for 20m2 solar panel surface. Suitable for PV panels.
Usage at homes: on-grid at roof on houses, trafic signalisations, street light,
cottages, small and large powerplants where solar panels are connected in serial
and output is connected directly to inverter or an external charging device.
Wind resistance is minimal 180km/h. In a Year basis
with single axis motor you can get 25% more income of energy
compared to a fixed system. Ground screws are not part of this solar
tracker package. You can buy them separatelly.
Solar tracker anti-shadowing software
function included.
Real energy measurement of two equal solar panels (fixed and
motorized)
- Three equal solar panels were exposed to the real
sun and conversed electrical power was measured.
- Test conditions:
- Solar panels (all):
2160W (producer spec. at AM 1.5)
- Date:
July 2009
- Time:
4:00 to 20:00 (sun time)
- Geo.
Latitude: 46°
N
- Weather conditions: sunny, but not totally
clear
- Results:
- Average energy of
fixed: 9028.8Wh
- Average energy of
motorized: 14623.2Wh
- Note: sum of motor energy consumption through all day
is 35.5Wh or 0.24% of all collected energy.
Efficiency of motorized panel:
161,6%

- Graphic chart of the motor dinamic and
static torque

Solar
Tracker 1-axis with backstr. for 12 panels / ST12SLT /
0114 |

|
Technical
datasheets |
|
- English leaflet in PDF format medium
resolution |
Download |
- English leaflet in PDF format low
resolution |
Download |
|
|
The
latest firmware |
|
Please, browse on support
page |
|
|
|
Certificates |
|
- Declaration of Conformity in PDF
format |
Download |

 |
|
|
|
|
Published 11/04/2018 For all our Trackers you can purchase a license to build construction (steel) parts. For additional information send your inquiry to our email and we will prepare an offer for you.
Published 05/07/2016
NEW VERSION HELIOS ANALYTICS PROGRAM AVAILABLE
Dear Valued Customers Here below is the link to the New version of Helios Analytics program. Please dowload it. If you will need any help, feel free to contact us.
http://www.solar-motors.com/gb/monitoring-programs-d489.shtml
Yours Sincerely, Sat Control team
Published 05/07/2016 NEW TRANSLATION TABLE FOR MECHANICAL VERSIONS
Dear Valued Customers Here below is the link to the New translation table for mechanical versions for linear motors . Please dowload it and if you will need any help, feel free to contact us.
Yours Sincerely, Sat Control team |


SAT CONTROL EAN CODES OR BAR CODES 383106390000 383106391000 383106392000 383106393000 383106394000 383106395000 383106396000 383106397000 383106398000 383106399000
|
|