| |
Home page
> SOLAR MOTORS
> MOTORS
> Solar Motor "SunTracer OG+" with backstrcture / 383106390135 / SM3SPMOG+
| Number of votes: 16, Total vote: 3.6 |
|
|
| SunTracer Family comparison (review betwen models) |
| Type of engine |
Servo motor with position encoder on steel worm cogwheel |
| Type of positioner |
Servo driver positioner with sun arc logic function calculation |
| Type of charging circuit |
/ |
| Type of timer |
Real time timer with calendar |
| Backup batery |
Backup for timer, position and data |
| Internal power batery for return at evening |
/ |
| Type of communication interface |
RS232 interface to PC |
| Seting changing posibility via PC |
Yes, Earth's hemisphere, time |
| Monitoring posibility via PC |
Yes, power supply voltage, positon, sun time |
| Turn on position sent from PC |
Yes, it turn on position sent from PC, also all other setting can be setted with string sent from PC |
| Upgrading posibility via PC |
Yes, firmware via PC with special upgrade program |
| Options |
/ |
| Type of backstructure clamp |
Clip, press and stick - 4 pcs |
| Operating protocol |
MSCS (Motorized Solar Calculation System) |
| Horizontal turning |
100°, software and hardware limit |
| Inclination (motor elevation) |
75° |
| Shaft diameter |
Ø40 mm (steel) |
| Final stage of cogwheel |
steel worm wheel |
| Turning speed |
1.33°/s ±25% @17V & @100W sol. cell & @-10°C |
| Motor supply from solar cell |
from 8 to 43VDC |
| Battery hysteresis of charging |
/ |
| Load hysteresis of discharging |
/ |
| Maximum charging current |
/ |
| Consumption in idle state |
20 mA ±25% @ 12V |
| Consumption during operation |
<200 mA ±25% @ 50W sol. cell |
| Initial current consumption |
350 mA @ t<0,25s typically |
| Operating temperature |
-25°C +70°C |
| Operation at humidity |
0% to 100% of relative humidity |
| Type of solar connectors |
TYCO SOLARLOK |
| Connection |
1 x pair Cu conductor cables with internal cross-section 1mm2 |
| Limit EAST-WEST |
end switches, programmable limit |
| Turning time interval |
1-15 minutes adjustable |
| Maximum working torque of output shaft |
35.9 Nm @17V & @0.5°/s (measured) |
| Destructive torque of output shaft |
>200 Nm |
| Estimated service life |
20,000 turns of 180° (90°E + 90°W), or 10 years |
| Arm width |
1 m |
| Motor shaft length |
1150 mm |
| Max dimen. of a solar cell |
2m x 1m of aluminium structure, made for panels with up to 2m2 in area |
| Max. weight of a solar cell |
25 kg under the condition that the solar cell is turning through the centre of gravity |
| Dimensions of a packed motor |
1175(L) x 135(W) x 200(H) mm |
| Product weight |
8 Kg |
| Max. safe wind speed |
<130 km/h |
|
Solar motor
made for 12V or 24V system. Suitable for panels up to dimensions 2m x 1m usage
at homes, trafic signs, semaphors, street light, cottages where medium power up
to 230W and wind resistance up to 130km/h are required. All metal parts inside
ensure high destruction forces.
Real energy measurement of two equal solar panels (fixed and
motorized)
- Two equal solar panels were exposed to the real sun and
conversed electrical power was measured.
- Test conditions:
- Solar panels (both): 200W (producer
spec. at AM 1.5)
- Date:
July 2005
- Time:
4:00 to 20:00 (sun time)
- Geo.
Latitude: 46°
N
- Weather conditions: sunny, but not totally
clear
- Results:
- Average energy of fixed:
836,8Wh
- Average energy of
motorized: 1354,0Wh
- Note: sum of motor energy consumption through all day
is 5,84Wh or 0.43% of all collected energy.
Efficiency of motorized panel:
161,1%
|
Solar Motor
"SunTracer OG+" / SM3SPMOG+ / 383106390135 |
|
|
Instructions for
installation and use in PDF format |
|
|
- English user
manual in PDF format - the latest!! |
Download |
|
- French user manual
in PDF format |
Download |
|
- German user manual in PDF
format |
Download |
|
- Italian user manual in PDF
format |
Download |
|
- Slovenian user manual in
PDF format - the latest!! |
Download |
|
- Spanish user manual in PDF
format |
Download |
|
Leaflets |
|
|
- English leaflet in PDF
format |
Download |
|
- SunTracer Solar Motor
Comparison table chart |
Download |
|
SolarLok® (Tyco)
documents |
|
|
- catalogue
SolarLok® |
Download |
|
- ordering codes for SolarLok®
connectors |
Download |
|
- step by step instructions for
SolarLok® connectors |
Download |
|
The
latest firmware |
|
|
Before
upgrading, look in the motor's menu for the proper version (the first
row) |
|
|
- SunTracer OG (only for ver.
H1.x) |
H1.4 |
|
- SunTracer OG (only for ver.
H3.x) |
Not
needed |
 |
|
