| |
Home page
> SOLAR MOTORS
> MOTORS
> Solar Motor "SunTracer OG" with backstrcture / 383106390136 / SM3SPMOG
| Number of votes: 7, Total vote: 2.3 |
|
|
| SunTracer Family comparison (review betwen models) |
| Type of engine |
Servo motor with position encoder on plastic worm cogwheel |
| Type of positioner |
Servo driver positioner with sun arc logic function calculation |
| Type of charging circuit |
/ |
| Type of timer |
Real time timer with calendar |
| Backup batery |
Backup for timer, position and data |
| Internal power batery for return at evening |
/ |
| Type of communication interface |
RS232 interface to PC |
| Seting changing posibility via PC |
Yes, Earth's hemisphere, time |
| Monitoring posibility via PC |
Yes, power supply voltage, positon, sun time |
| Turn on position sent from PC |
Yes, it turn on position sent from PC, also all other setting can be setted with string sent from PC |
| Upgrading posibility via PC |
Yes, firmware via PC with special upgrade program |
| Options |
/ |
| Type of backstructure clamp |
Clip, press and stick - 4 pcs |
| Operating protocol |
MSCS (Motorized Solar Calculation System) |
| Horizontal turning |
100°, software and hardware limit |
| Inclination (motor elevation) |
75° |
| Shaft diameter |
Ø40 mm (steel) |
| Final stage of cogwheel |
plastic worm wheel |
| Turning speed |
1.33°/s ±25% @17V & @100W sol. cell & @-10°C |
| Motor supply from solar cell |
from 8 to 43VDC |
| Battery hysteresis of charging |
/ |
| Load hysteresis of discharging |
/ |
| Maximum charging current |
/ |
| Consumption in idle state |
20 mA ±25% @ 12V |
| Consumption during operation |
<200 mA ±25% @ 50W sol. cell |
| Initial current consumption |
350 mA @ t<0,25s typically |
| Operating temperature |
-25°C +70°C |
| Operation at humidity |
0% to 100% of relative humidity |
| Type of solar connectors |
TYCO SOLARLOK |
| Connection |
1 x pair Cu conductor cables with internal cross-section 1mm2 |
| Limit EAST-WEST |
end switches, programmable limit |
| Turning time interval |
1-15 minutes adjustable |
| Maximum working torque of output shaft |
35.9 Nm @17V & @0.5°/s (measured) |
| Destructive torque of output shaft |
>100 Nm |
| Estimated service life |
20,000 turns of 180° (90°E + 90°W), or 10 years |
| Arm width |
0,6 m |
| Motor shaft length |
560 mm |
| Max dimen. of a solar cell |
1m x 0.6m of aluminium structure, made for panels with up to 0.6m2 in area |
| Max. weight of a solar cell |
10kg under the condition that the solar cell is turning through the centre of gravity |
| Dimensions of a packed motor |
1175(L) x 135(W) x 200(H) mm |
| Product weight |
6,5 Kg |
| Max. safe wind speed |
<160km/h |
|
Solar motor
made for 8 to 40 VDC from external power supply. Without charger controller.
Suitable for panels on grid up to dimensions 1m x 0,6m usage at homes - on grid
at roof, trafic signs, street light, semaphors, street light, cottages where
solar panels are connected in serial and output from them is connected directly
to inverter, and where big wind resistance is required and price is imporant
too.
Real energy measurement of two equal solar panels (fixed and
motorized)
- Two equal solar panels were exposed to the real sun and
conversed electrical power was measured.
- Test conditions:
- Solar panels (both): 50W (producer
spec. at AM 1.5)
- Date:
July 2005
- Time:
4:00 to 20:00 (sun time)
- Geo.
Latitude: 46°
N
- Weather conditions: sunny, but not totally
clear
- Results:
- Average energy of
fixed: 209,2Wh
- Average energy of
motorized: 338,5Wh
- Note: sum of motor energy consumption through all day
is 5,84Wh or 1,69% of all collected energy.
Efficiency of motorized panel:
161,8%
|
Solar Motor
"SunTracer OG" / SM3SPMOG / 383106390136 |
|
|
Instructions for
installation and use in PDF format |
|
|
- English user
manual in PDF format - the latest!! |
Download |
|
- French user manual
in PDF format |
Download |
|
- German user manual in PDF
format |
Download |
|
- Italian user manual in PDF
format |
Download |
|
- Slovenian user manual in
PDF format - the latest!! |
Download |
|
- Spanish user manual in PDF
format |
Download |
|
Leaflets |
|
|
- English leaflet in PDF
format |
Download |
|
- SunTracer Solar Motor
Comparison table chart |
Download |
|
SolarLok® (Tyco)
documents |
|
|
- catalogue
SolarLok® |
Download |
|
- ordering codes for SolarLok®
connectors |
Download |
|
- step by step instructions for
SolarLok® connectors |
Download |
|
The
latest firmware |
|
|
Before
upgrading, look in the motor's menu for the proper version (the first
row) |
|
|
- SunTracer OG (only for ver.
H1.x) |
H1.4 |
|
- SunTracer OG (only for ver.
H3.x) |
Not
needed |
 |
|
