| |
Home page
> SOLAR TRACKERS
> DUAL AXIS SUN TRACKERS
> Solar Tracker 2-axis ST44M2V4P w backstr. for 4 pan. 1.2 kWp, without main pole and ground screws
| Number of votes: 11, Total vote: 4 |
|
|
| SunTracer Family Comparison (review between models) |
| Mechanical Capabilities |
| Number of turning axis |
Dual-Axis |
| Hour Angle Limit |
100˚, software and hardware limit |
| Elevation angle |
15 - 90˚, adjustable start |
| Type of hour-angle motor |
Linear Motor SM4S520M2 with stroke of 520 mm |
| Type of elevation-angle motor |
Linear Motor SM4S520M2 with stroke of 520 mm |
| Hour-angle shaft diameter and length |
Ø48 mm, L=1450 mm (steel) |
| Turning speed of hour angle shaft |
0,039 - 0,063 °/s at no load, see graph |
| Turning speed of elevation shaft |
0,052 - 0,062 °/s at no load, see graph |
| Max. dynamic torque of the hour-angle shaft |
200 Nm - 330 Nm depend from HA, see graph |
| Max. dynamic torque of elevation shaft |
330 Nm - 400 Nm depend from EA, see graph |
| Destructive torque of the hour-angle shaft |
750 Nm - 1250 Nm, depend from HA, see graph |
| Destructive torque of elevation shaft |
1250 Nm - 1500 Nm, depend from HA, see graph |
| Backstructure size |
2 pcs of 1000 (H) mm & 4 pcs of 1500 (V) mm |
| Type of backstructure clamp |
Toothed scissors gripers - 16 pcs |
| Tube diameter for mounting |
Ø76,1 x 3,6 mm with reduced tube to Ø68 mm (not included with kit) |
| Max. dimensions of a solar panel |
4 pieces of 0,99 m x 1,95 m in total 7,7 m2 |
| Max. weight of a solar panel |
4 pcs per 30 kg |
| Estimated service life |
5.000 rotations of 200° (100°E + 100°W), or 10 years |
| |
| Positioning System Data |
| Tracking accuracy |
<0.5˚ (optionally <0.1˚ - for additional payment) |
| Operating Protocol |
TdAPS (Time derived Astronomical Positioning System) |
| Type of Positioning System |
Servo driver positioner with TdAPS arc logic function calc. |
| Type of positioner |
Din Rail positioner MICRO and externor cables |
| Type of timer |
GMT clock with EOT and calendar |
| Type of application program for supervision and setting |
Solar tracking system monitor via web site |
| Setting and changing data via PC |
Yes, It can be setup up to 1000 parameters |
| Monitoring possibility via PC |
Yes, It can be monitored up to 1000 parameters |
| Turned on the position sent from PC |
Yes, it turn on position sent from PC, also all other setting can be commanded with string sent from PC |
| Turning time interval |
Tipicaly 6 - 7 s |
| |
| Communication Data |
| Type of communication interface |
USB interface |
| Networking solution for control from centre |
CAN BUS, RS485 |
| |
| Firmware - Software |
| Upgrading possibility via PC |
Yes, firmware via PC with help of web wizard |
| |
| Electrical Data |
| Motor Power Supply |
24 VDC ± 10% (2A current capacity) |
| Backup battery |
CR 2512 coin |
| Max. consumption during the operation of the hour-angle shaft |
500 mA @ 330 Nm, see graph |
| Max. Current of elevation shaft |
500 mA @ 400 Nm, see graph |
| Standby consumption (when is not moving) |
20 mA ± 25% @ 24V |
| Power supply connection |
1 piece of 2 Wire Cable with an Internal Cu Conductor of 1,0 mm2 (not included with kit) |
| Box |
190 (L) x 140 (W) x 70 (H) mm with connection harness |
| |
| Environmental Data |
| Operating temperature |
-25°C to +70°C (optionally with artic grease for teperatures from -40°C up to +70°C) |
| Operation at humidity |
0% to 100%, relative humidity |
| Max. safe wind speed |
<130 km/h (tested up to 180 km/h) |
| |
| Corrosion, weather and chemical resistance |
| Neutral Salt Spray (3000 h, EN ISO 9227 NSS) |
/ |
| Hot-dip galvanizing (HDG, EN ISO 1461) |
75 - 100 μm (equivalent of 50 years) |
| |
| Packaging |
| Dimensions of a packed product |
1 box of 1600 (L) x 245 (W) x 202 (H) mm & 1 box of 2050 (L) x 180 (W) x 70 (H) mm |
| Product weight |
55 kg |
| |
| Quality Certificates |
| International Protection Rating (IEC 60529) |
IP33 |
| Electromagnetic Compatibility (EMC Directive 89/336/EEC) |
Yes |
| Low Voltage Equipment Directive (EEC Council Directive 73/23/EEC) |
Yes |
| |
| Optional Properties |
| Anti-Shadowing Function |
Yes, included |
| Heliostat usage |
Yes, for additional payment |
|
2 axis or dual axis Solar
Tracker with accuracy better than 0,5 deg and backstructure for 4 pieces of
solar panels dimensions 0,99 m x 1,95 m and weight of 30 kg max each.
So together for 7,7 m2 solar panel surface. A Suitable for PV panels,
concentrators - CPV, heliostats. Usage at homes: on-grid at roof on houses,
trafic signalisations, street light, cottages, small and large powerplants where
solar panels are connected in serial and output is connected directly to
inverter or an external charging device. Wind resistance is minimal
130km/h. In a Year basis with 2 axis motor you can get 7% more income of
energy compared to single axis motor. Ground screw and main pole are not
part of this solar tracker package. You can buy it separatelly.
Solar tracker anti-shadowing
software function included.
|
Solar
Tracker ST44M2V4P / 383106390103 |
|
|
- New Instructions for
installation and use (english language) |
Download |
| - Instructions for installation and
use (german language) |
Download |
| |
|
| Energy
Production |
|
| - Energy production of solar tracker
ST44M2V4P - India |
Download |
|
|
|
| Technical
drawings |
|
| - Part list |
Download |
| - Technical drawing |
Download |
|
Technical
datasheets |
|
|
- English leaflet in PDF format
medium resolution |
Download |
|
- English leaflet in PDF format
low resolution |
Download |
|
The
latest firmware |
|
|
Please,
browse on support page |
|
|
- Production of solar energy
from solar tracker ST44M1V4P Sat Control (sample - for location
Cyprus) |
Download |
|
Certificates |
|
|
- Declaration of Conformity in
PDF format |
Download |
Real energy measurement of two equal
solar panels (fixed and motorized)
- Three equal solar panels were exposed to the real sun
and conversed electrical power was measured.
- Test conditions:
- Solar panels (both): 1.2 kWp
(producer spec. at AM 1.5)
- Date:
July 2010
- Time:
4:00 to 20:00 (sun time)
- Geo.
Latitude: 46°
N
- Weather conditions: sunny, but not totally
clear
- Results:
- Average energy of
fixed: 3762,0Wh
- Average energy of motorized:
6093,0Wh
- Note: sum of motor energy consumption through all day
is 17.52Wh or 0.29% of all collected
energy.
 |
| |
| |
| |
| |
|
Published 25/4/2013 - CLOSED FOR LABOUR DAY HOLIDAYS
Dear Valued Customers
We inform all our valued customers that we will be closed for Labour Day holidays from 1st of May 2013 to 6th of May 2013.
Thank you for understanding.
Yours Sincerely,
Bogdan Bolka, CEO
All news? > Read More
------------------------------------ |
|
|
