|
Home page
> Support
Upgrading page
Important note: Before upgrading, check HW / MV version of the product you own. Always use the proper version, otherwise product may not work as expected.
Hint: if the browser doesn't want to download the file with clicking it, hold cursor over the link, right-click with mouse, "save link as" and save file on disk.
Calendar of working days in Sat Control d.o.o.
Firmwares:
Positioner type: |
Firmware : |
HW:36A (Micro) NEW (18-10-2014) |
EHX (ver.6.64) compatible with Helios Analytics ver. 2.0 only or higher ATTENTION: If you are upgrading from version lower than 6.56 to higher, import suitable *.hss file below |
HW:27E (18-10-2014) |
EHX (ver.6.64) compatible with Helios Analytics ver. 2.0 only or higher ATTENTION: ver. 6.58 and higher, change parameters: A1 = 134 A2 = 0 |
HW:26A |
EHX (ver.6.36) |
HW:27C0,27C1 (18-10-2014) |
EHX (ver.6.64) compatible with Helios Analytics ver. 2.0 only or higher ATTENTION: ver. 6.58 and higher, change parameters: A1 = 134 A2 = 0 |
Full default settings:
Tracker type : |
Full default settings : |
SM44M1VxP |
HSS - Helios import files |
SM44M2VxP |
HSS - Helios import files |
SM44M3V15P |
HSS - Helios import files |
SM3xxx, MC13 |
HSS - Helios import files |
SM3xxx, MV: 1010, 1000 ; 1 Hall |
HSS - Helios import files |
SM3xxx, MV: 1010, 1000 ; 2 Halls |
HSS - Helios import files |
SM3xxx, MV: 1100, 1101, 1110, 1111 |
HSS - Helios import files |
SM3xxx, MV: 1102, 1112, 1120, 1121 |
HSS - Helios import files |
Partial default settings:
Actuator only: |
Partial settings : |
A axis, Motor M1, MV:1000 |
HSS - Helios import files |
A axis, Motor M1, MV:1001,1005 |
HSS - Helios import files |
A axis, Motor M1, MV:1002,1003,1004 |
HSS - Helios import files |
A axis, Motor M2, MV:1006, 2000 |
HSS - Helios import files |
A axis, Motor M3, MV:1000 |
HSS - Helios import files |
B axis, Motor M1, MV:1000 |
HSS - Helios import files |
B axis, Motor M1, MV:1001,1005 |
HSS - Helios import files |
B axis, Motor M1, MV:1002,1003,1004 |
HSS - Helios import files |
B axis, Motor M2, MV:1006, 2000 |
HSS - Helios import files |
B axis, Motor M3, MV:1000 |
HSS - Helios import files |
Obsolete models:
Drivers for USB to RS485 converter
Mechanical_gears_and_Common_parameters Motors MC pdf , Motors MC.txt Translation_Table_for_Mechanical_versions_(Older_to_Newer)
Technical Support:

|